The largest part of our manufacturing facility is devoted to open moulding via either hand layup or sprayup (chopper gun), We use the latest non-atomizing guns from Magnum/Venus products known as their Fluid Impingement Technology (FIT). These guns allow more precise control of the placement of material in the moulds as well as dramatically reducing VOC emissions. All materials are metered using computer controlled measuring systems to give us tight control over weights and costs. Our multi-colour gelcoat systems also use FIT technology to improve efficiency and ultimate surface finish.

We also employ closed moulding using 2 part moulds where precise control of the wall thickness and inner surface shape are required. These technologies include cold press moulding, resin transfer moulding (RTM), vacuum assisted light RTM, and resin infusion. Your engineering requirements, production rate and budget will all determine which production technology will be best for your part or product.

After de-moulding all parts go to our Trimming and Finishing department. There all parts are trimmed to their final size & shape, all holes are cut or drilled and every part is inspected to ensure quality and consistency.

When precise trimming tolerances are required we use our CNC machining center to trim, backface, drill and cutout your parts. Parts can be sanded or buffed as well as packaged for delivery to your plant or direct to your customers.